|
DOWNLOADS:
|
A chemical release for concrete forms that effectively prevents bonding of concrete to steel, aluminum, plywood and composite forms. Composed of organic chemicals that react with the concrete to prevent adhesion and provide a quick and easy release.
Pleasantly scented and free of kerosene, Q-2 FORM RELEASE is a thin amber liquid that remains fluid at subfreezing temperatures and can be stored indefinitely.
Compliances
V.O.C. compliant
Features
VOC-compliant, pleasantly scented
Waterproofs forms, prevents rotting
No staining, discoloration, pitting
Reduces maintenance costs 50% on metal forms
Should not be over-applied - saves material costs
|
Usage
Chemically releases hardened concrete from forms, form liners and equipment
Coverage
Steel, aluminum, plastic and high-density plywood: 2,000-3,000 sq. ft./gal.
Medium-density plywood: 1,000-1,500 sq. ft./gal.
BB grade plywood: 1,000 sq. ft./gal.
Rough-sawn lumber, striated plywood
First use, two coats: 700 sq. ft./gal.
Subsequent uses 1,000: sq. ft./gal.
Packaging
5 gal./18.9 L pails
55 gal./208 L drums
Cautions
For industrial use only
Keep out of reach of children
Keep away from heat or open flame
Avoid prolonged breathing of vapors
Avoid prolonged or repeated skin contact.
|
Application
Forms should be free from dirt, hardened concrete and foreign matter. Release agent is ready to use direct from container. Apply a thin film for maximum protection and economy, using a Scotchman fog tip to produce high visual impact concrete. Spray uniformly with cross spray to avoid pin holes and uncoated areas. Avoid over-application. Prior to coating plywood forms, apply one or two heavy brush coats to edges for water-proofing protection.
Increases form life: Waterproofs mill oiled plywood forms to prevent the wicking of alkaline water from the concrete into the form, preventing the form from rotting out and raising the grain, thus doubling or tripling form life. Protects metal forms by chemically reacting and forming a rust-proof film. Makes pre-manufactured forms self-cleaning and reduces maintenance costs by as much as 50%.
Does not impair the natural bonding of paints and other surface coatings, when used in accordance with the manufacturer's instructions. Cuts cleanup time to a minimum. Making forms virtually self-cleaning; if sprayed daily, equipment can be cleaned in a minimal amount of time.
Q-2 FORM RELEASE leaves no residue or cement dust on the concrete surface, so concrete is left with an architectural surface ready for application of curing compound, sealer or bonder for plaster, mastics or paints. When any material is to be applied on top of the concrete, follow the application instructions of the material manufacturer.
|